Economic interior coating

DESCRIBE:

Being water-based paints with high quality, used for coating interior surfaces, suitable for all spatial and architectural construction. Are produced on modern technological lines for bright paint film, durable and durable colors.

MAIN INGREDIENT:

Water, acrylic resin, titanium oxide activated with the additive, does not contain lead and mercury.

COVERAGE:

Theoretical Coverage: 9m2 – 11m2 / kg / layer.

MANUAL:

Ensure painted surface must be clean, free of impurities reducing adhesion such as flour, dust, grease or wax.

Substrate moisture content less than 16% according to the moisture meter. For new walls have dried from 21-28 days in normal conditions of 300C, 80% relative humidity.

Note: Do not apply in wet weather (temperatures below 100C).

Use proper sanding sandpaper then wipe the dust.

Stir well before using.

To application: Use roller, brush, spray gun.

Surface dry: 45 minutes.

Coat after: 2-3 hours.

Number of coats: 2 coats.

Mixing: The rate does not exceed 5% – 10% water.

Cleaning: Clean tools with soap and water immediately after use.

STORAGE: Store in a dry and cool. Place the container in a vertical position safely & tightly closed.

SON CONSTRUCTION CONSULTING:

Use cleaning detergents & kill moss surface treatment with moss.

Use 1 and 2 KANTECH putty coat primer for smooth surfaces, increased adhesiveness and long lasting color retention.

Mix too much water will reduce coverage, does not guarantee the quality and durability of the paint.

SAFETY, HEALTH AND ENVIRONMENT:

May cause allergies when exposed to the skin.

May cause long-term adverse effects to aquatic environments.

Keep out of reach of CHILDREN.

Avoid breathing vapor or spray.

Wear suitable gloves.

Avoid paint waste into the environment.

When painting should wear eye protection, if contaminated paint should wash eyes with plenty of water and seek doctor immediately.

In case of spilled paint, should collect dirt or sand.