Putty KANTECH

Ingredients: Cement, CaCO3, organic polymer powders and other additives.

Quality standards:

– Appearance: powder left porous, non-clumping, uniform with white, making the …

– Bulk density g / dm3: 950 + 50

– Grits, rest on every floor 0.3mm, no larger than 0.3%

– Flexible plasticity of the mixture (water / powder = 1:28), 80-120 mm

– Setting time: Start, hours, minutes, not earlier than: 1:40; End, hours, minutes, no later than 5:50

Bond strength:

– In standard conditions: MPa = 0.50 achieved technical regulations NTR 16: 2014 / BXD. Indoor ≥ 0:35; Outdoor ≥ 0:45. Certified from the Institute for Building Science and Technology – Advisory Centre against corrosion and Construction.

– After water immersion 72h: MPa = 0:35 achieve technical regulations NTR 16: 2014 / BXD. Indoor ≥ 0:25; Outdoor ≥ 0.3. Certified from the Institute for Building Science and Technology – Advisory Centre against corrosion and Construction.

– After the heat shock cycle test: MPa = 0.40 achieved technical regulations NTR 16: 2014 / BXD. Outdoor ≥ 0.3. Certified from the Institute for Building Science and Technology – Advisory Centre against corrosion and Construction.